- Your cart is empty
- Continue Shopping
Additives/Extenders
Showing 209–224 of 569 results
GREASIL 500
GREASIL 500 is a grease with high anti-seizing properties even in the presence of high and intermittent loads. High resistance to the action of cutting and lubricating organs.
Thanks to its strong mechanical stability, GREASIL 500 is recommended where normal greases are unable to protect against wear of the work surfaces and wherever a grease with excellent EP (extreme pressure) characteristics is required.
GREASIL MS 12
GREASIL MS 12 is a silicone grease used as a heat sink with dielectric and moisture sealing functions in semiconductors (transistors, diodes, etc.).
Thanks to its dielectric, thermally conductive and water repellent properties, GREASIL MS 12 provide excellent protection of electrical circuits, does not dry, does not fuse and resists up to 220 ° C.
GREASIL MS 354
GREASIL MS 354 is a silicone grease suitable for lubricating rubber components at high and low temperatures. It guarantees good resistance to oxidation and humidity.
GREASIL MS 354
GREASIL MS 354 is a silicone grease suitable for lubricating rubber components at high and low temperatures. It guarantees good resistance to oxidation and humidity.
GREASIL MS 4
GREASIL MS 4 is a silicone grease suitable for lubricating rubber components at high and low temperatures. It provides good resistance to oxidation and humidity.
Halar® 6614
Halar® 6614 is a green, semi-crystalline melt processable fluorinated primer. It is designed to be applied directly to substrates by electrostatic or fluidized bed techniques. In particular Halar® 6614 is recommended for use as a primer in protection and anti-corrosion applications.
Halar® 6914
Halar® 6914 is a gray, semi-crystalline melt processable fluorinated primer. It is designed to be applied directly to substrates by electrostatic or fluidized bed techniques. In particular Halar® 6914 is recommended for use as a primer on aluminum large surface area parts in protection and anti-corrosion applications.
HEXAPHORTM
| roduct & Grade | Type & Nature | Description and Recommendations |
| HEXAPHORTM 320 | Electroneutral Polymeric Dispersant | Pigment Wetting dispersion & stabilization. Antiflooding & antifloating agent for alkyd based paints, inks & coatings. |
| HEXAPHORTM 321 | Electroneutral Polymeric Dispersant | Wetting, dispersing, stabilizing, Anti-settling,Anti flooding additives for solvent base() coating. Improves colour acceptance of tinters in enamel bases. |
| HEXAPHORTM 322 | Anionic poymeric Dispersant | Pigment, Wetting, Dispersion, Stabilization, Anti-flooding & anti-floating additives. Excellent result inAlkyd Based Systems. |
| HEXAPHORTM 323 | Modified Polyester based dispersant | Post additive to control flooding, floating and flocculation of whites. Improves colour acceptance of tinters in enamel bases. |
| HEXAPHORTM 327 | Neutral polymeric component | Post additive to control flooding, floating and flocculation of whites. Improves colour acceptance of tinters in enamel bases. |
| HEXAPHORTM 328 | Modified Polyurethane based dispersant | Post additive to control flooding, floating and flocculation of colours. Improves colour acceptance of tinters in bases. Works well with epoxies. |
| HEXAPHORTM 329 | Neutrial polymeric component | Post additive to control flooding, floating and flocculation of colours. Improves colour acceptance of tinters in bases. Works well with epoxies. |
| HEXAPHORTM 400 | Modified polyurethane based dispersant | Wetting, dispersing, stabilization, anti-setting, anti-flooding, anti-floating additive. Improves colour acceptance of tinters in enamel bases. |
HT 16
HT 16 is an organo-modified silicone defoamer in aqueous emulsion indicated for the prevention, control and elimination of foam in high temperature, strong mixing and high pressure processes such as in textile machines (Jet-Dyeing). Thanks to its good dispersibility and compatibility with surfactant systems, HT 16 is also used as an antifoam in detergents.
Very effective in wide pH ranges, even strongly alkaline.
HT Clay
BASF offers a complete line of calcined and hydrous kaolin clays to meet the most stringent needs of the coated board industry. BASF's kaolins allow board producers to obtain maximum quality at minimum cost to produce the opacity, brightness, gloss, and printability needed in a variety of applications.
Hydrite PXN ED
Hydrite® PXN ED by Imerys is a spray dried, fine particle size hydrous kaolin. Exhibits chemical inertness, and offers improved spacing of TiO2 particles in a paint film & improved opacity. It is a naturally occurring hydrated aluminum silicate with lamellar or platy particle shape. Hydrite® PXN ED is recommended for electro-deposition paints.
Hydrite R
Non-predispersed hydrous kaolin pigment. Used in interior emulsion paints and inks. Possesses good whiteness.
Hydrite RS
Hydrite® RS by Imerys is a spray dried, fine particle size hydrous kaolin. Exhibits chemical inertness, and offers improved spacing of TiO2 particles in a paint film and improved opacity. It is a naturally occurring hydrated aluminum silicate with lamellar or platy particle shape. Hydrite® RS is recommended for latex eggshell and satin paints.
Hydrite RS-A
Hydrite® RS-A by Imerys is a spray dried, fine particle size hydrous kaolin. Exhibits chemical inertness, and offers improved spacing of TiO2 particles in a paint film and improved opacity. It is a naturally occurring hydrated aluminum silicate with lamellar or platy particle shape. Hydrite® RS-A is recommended for interior latex & eggshell paints, primer systems, and universal colorants.