- Your cart is empty
- Continue Shopping
Additives/Extenders
Showing 305–320 of 569 results
MARK IC 2310
Recommendation & Method of use:
DOSAGE FOR PRIMERS:- 0.2%
DOSAGE FOR ENAMELS CONTAINING HEAVY PIGMENTS (LEAD, CHROMES, ETC):- 0.1%.
MARK IC 2442
Recommendation & Method of use:
MARK IC 2442 has very rapid foam knock-down properties.
From 0.25 to 0.5% of Anti-foam agent on the weight of the coating solids is usually sufficient to suppress air-entrainment.
For adhesives, 1 to 2% of MARK IC 2442 based on the weight of the latex solids is more than sufficient.
MARK IC 2451
Recommendation & Method of use:
MARK IC 2451 is recommended for formulations where air-entrainment cause
operational difficulties or impairs the quality of the product.
For fiber reinforced spray-up and hand lay-up resins, adhesives and cobalt-accelerated putty compounds, from 0.25 to 0.5% of defoamer on the weight of the solids is usually sufficient to suppress air-entrainment.
MARK IC 2460
Recommendation & Method of use:
MARK IC 2460 is recommended for formulations where air-entrainment cause operational difficulties or impairs the quality of the product.
MARK IC 2470
Recommendation & Method of use:
MARK IC 2470 is recommended for formulations where air-entrainment cause operational difficulties or impairs the quality of the product.
MARK IC 2610
Recommendation & Method of use:
Step 1) Prepare a 10% solution of MARK DC 1610 in the media used in the paint. (Eg. MTO, Toluene etc.)
Step 2) Add 1ltr. of the above-prepared solution in 100 ltrs. of paint during the thinning down operation.
MARK IC 2610
Recommendation & Method of use:
1. Prepare a 10% solution of MARK IC 2610 in the media used in the industrial coating. (E.g. MTO, Toluene etc.)
2. Add 1 L of the above-prepared solution in 100 L of industrial coating during the thinning down operation.
MARK IC 2710
Recommendation & Method of use:
1) 0.1-0.2% Concentration on batch size.
2) Preferably at end stage.
3) Dosages need optimization (Caution: An overdose can lead to recoating problems)
MARK IC 2710
Recommendation & Method of use:
1. 0.1- 0.5% Concentration on batch size.
2. Preferably at end stage.
3. Dosages need optimization (Caution: An overdose can lead to recoating problems)
MARK IC 2740
Recommendation & Method of use:
1) 0.3-0.8% Concentration on batch size.
2) Preferably at end stage.
1) 0.3-0.8% Concentration on batch size.
2) Preferably at end stage.
3) Dosages need optimization.
MARK IC 2770
Recommendation & Method of use:
0.2-2 % additive based on the total formulation, depending on the polarity of the system.
MARK IC 2810
pH stabilizer for water and solvent systems
Mecellose HiEnd 2001
Mecellose HiEnd 2001 cellulose ether derivative for industrial use is white to slightly a off-white free flowing powder.