- Your cart is empty
- Continue Shopping
Shop
Showing 465–480 of 1137 results
MARK IC 2063
Recommendation & Method of use:
Especially recommended for unsaturated polyester resins.
0.5-1.5 % additive (as supplied) based upon fillers.
For other Applications the right quantity can be determined by experiments.
MARK IC 2064
Recommendation & Method of use:
Especially recommended for unsaturated polyester resins.
0.5-1.5 % additive (as supplied) based upon fillers.
For other Applications the right quantity can be determined by experiments
MARK IC 2072
Recommendation & Method of use:
Inorganic pigments: 5-10 %
Titanium dioxides: 2-4 %
MARK IC 2072 should be added to the resin mixture prior to homogenization and the addition of the pigments.
For other Applications the right quantity can be determined by experiments.
MARK IC 2073
Recommendation & Method of use:
MARK IC 2073 is particularly recommended for epoxy resins systems, UV systems, PVC
plastisols, Adhesives & Sealants.
0.5-1 % additive (as supplied) based upon fillers for wetting and dispersion.
0.25-1 % additive (as supplied) based upon resin for stabilizing the viscosity.
For other Applications the right quantity can be determined by experiments.
MARK IC 2230
Recommendation & Method of use:
1) 0.5% MARK IC 2230 is to be added in formulation for anti-settling properties.
2) 2% MARK IC 2230 is to be added in formulation for anti-sagging properties
MARK IC 2240
Recommendation & Method of use:
1) 0.5% MARK IC 2240 is to be added in formulation for anti-settling properties.
2) 2% MARK IC 2240 is to be added in formulation for anti-sagging properties.
MARK IC 2310
Recommendation & Method of use:
DOSAGE FOR PRIMERS:- 0.2%
DOSAGE FOR ENAMELS CONTAINING HEAVY PIGMENTS (LEAD, CHROMES, ETC):- 0.1%.
MARK IC 2442
Recommendation & Method of use:
MARK IC 2442 has very rapid foam knock-down properties.
From 0.25 to 0.5% of Anti-foam agent on the weight of the coating solids is usually sufficient to suppress air-entrainment.
For adhesives, 1 to 2% of MARK IC 2442 based on the weight of the latex solids is more than sufficient.
MARK IC 2451
Recommendation & Method of use:
MARK IC 2451 is recommended for formulations where air-entrainment cause
operational difficulties or impairs the quality of the product.
For fiber reinforced spray-up and hand lay-up resins, adhesives and cobalt-accelerated putty compounds, from 0.25 to 0.5% of defoamer on the weight of the solids is usually sufficient to suppress air-entrainment.
MARK IC 2460
Recommendation & Method of use:
MARK IC 2460 is recommended for formulations where air-entrainment cause operational difficulties or impairs the quality of the product.
MARK IC 2470
Recommendation & Method of use:
MARK IC 2470 is recommended for formulations where air-entrainment cause operational difficulties or impairs the quality of the product.
MARK IC 2610
Recommendation & Method of use:
Step 1) Prepare a 10% solution of MARK DC 1610 in the media used in the paint. (Eg. MTO, Toluene etc.)
Step 2) Add 1ltr. of the above-prepared solution in 100 ltrs. of paint during the thinning down operation.